EM-Tec pin stub storage boxes

High capacity, high density, economical pin stub storage boxes

Introduction

• EM-Tec SB1 single pin stub storage tube is ideal for storing or transporting a single pin stub. Protects the SEM specimen on the pin stub from cross contamination. Capacity is a single pin stub with 12.7 or 19mm diameter. Designed for 3.2mm pins with various lengths (6, 8, 9.5 and 14mm) The pin stub is held firmly in the brown LDPE cap (base) of the clear polystyrene tub. Maximum specimen height 25-20mm.

• EM-Tec SB77 high capacity wooden box with 77 storage positions for standard Ø12.7mm pin stubs. Pin stubs up to 100mm can be stored in the SB77 box. Made from beech and birch wood with a solid clear coating on the inside and outside. Includes two brass plated hinges and a single clasp. Outside dimensions are 189 x 138 x 46mm; 25.5mm inside clearance which leaves a maximum sample height of 22mm on the pin stubs. Light sensitive specimens are protected when the box remains closed. Larger size archiving box or for protecting valuable sample or calibration standards.

• EM-Tec SB176 high capacity wooden box with 176 storage positions for standard 12.7mm pin stubs. Pin stubs up to 100mm can be stored in the SB176 box. Made from beech and birch wood with a solid clear coating on the outside and inside. Includes two brass plated hinges and two clasps. Outside dimensions are 276 x 189 x 46mm; 25.5mm inside clearance which leaves a maximum sample height of 22mm on the pin stubs. Light sensitive specimens are protected when the box remains closed. The is the ideal long term large storage box or to protect valuable samples.

• EM-Tec SB4 clear styrene box for storing up to four standard Ø12.7mm (1/2”) pin stubs. LDPE insert holds the pin. Insert comprises a central post to prevent sample touching the lid. Outside dimensions are  75x40x22mm, with a maximum sample height of 6mm on the pin stubs

• EM-Tec SB8 clear/blue styrene box with 8 storage positions for standard Ø12.7mm pin stubs. Made from polystyrene with clear lid and blue base with LDPE insert with posts. Outside dimensions are 116 x 55 x 32mm, 13mm clearance which leaves a maximum sample height of 10mm on the pin stubs.

• EM-Tec SC12 clear combi styrene box with 12 storage positions for standard Ø12.7mm stubs. The stubs are held in the holes of the LDPE insert. Post in the middle of the insert keeps the samples clear of the lid. Suitable for both the 5 and 10mm height and angled cylinder stubs. Outside dimensions are 100x69x29mm. Maximum sample height is up to 10mm, depending on pin stub height. Alternatively, the EM-Tec SC12 storage box can also be used for the Ø9.5mm and Ø12.2mm JEOL cylinder stubs.

• EM-Tec SB28 medium capacity clear styrene box with 28 storage positions for standard Ø12.7mm pin stubs. Pin stubs up to 50mm can be stored in this box.  Made from clear polystyrene with two hinges and lock. Outside dimensions are 120 x 84 x 36mm; 17mm inside clearance, which permits a maximum sample height of 13.5mm. Full visibility of samples in this clear styrene box. Low cost pin stub storage box; ideal for short term storage and handling.

• EM-Tec SB153 high capacity clear styrene box with 153 storage positions for standard Ø12.7mm pin stubs. Pin stubs up to 100mm can be stored in this heavy duty box.  Made from clear polystyrene with two brass plated hinges and snap-lock lid. Outside dimensions are 275 x 160 x 57mm.  The 34.5mm inside clearance leaves a maximum sample height of 31mm on the pin stubs.  Full visibility of samples or holders through the clear lid. This clear and heavy duty high box is ideal for storing pin stub based SEM sample holders and larger specimens. Cost for storing pin stubs in this high capacity box is 40-50% lower, compared to pin stub storage boxes holding only 14 or 18 pin stubs..

Specifications of the EM-Tec high capacity pin stub storage boxes